Put the transmission and shifter in the position specified by the service information, often Neutral. Remove the clip or fastener securing the cable housing to its bracket. If you can get underneath it on the driver side you can see both cable ends on the back of the transmission. Move them both to the middle position and the car should be in neutral. Learn how to replace a shifter cable safely, diagnose common symptoms, and restore precise gear selection in manual and automatic vehicles. Master the complete process of replacing and adjusting your vehicle’s transmission shifter cable, from diagnosis to final calibration. Find out what putting a car in neutral does, how to switch to this position, when to shift, and more in this article. With the transmission locked in Neutral, move the shifter handle inside the car to its corresponding Neutral detent position. The adjustment mechanism is then manipulated to ensure the cable end aligns perfectly with the transmission lever’s attachment point without any tension or compression. Learn how to replace a shifter cable and adjust it for perfect gear alignment. Prevent transmission damage with our step-by-step DIY calibration guide.